Unbuild orders

In some cases, it is necessary to dismantle manufactured products into their individual components. This may be required if too many units of a product were built, or if the components of one product must be reclaimed to use in the manufacturing of another.

In Odoo Manufacturing, products can be dismantled, and their components returned to inventory, using unbuild orders. By using unbuild orders to accomplish this task, inventory counts for the finished product and its components remain accurate, based on the quantity of products dismantled, and the quantity of components reclaimed.

Steps to Create an Unbuild Order

Step-by-step:

1. Go to:
   Manufacturing → Operations → Unbuild Orders
2. Click New
3. Select the Product to unbuild
   → This auto-fills the Bill of Materials (BoM)
   → You can manually change the BoM if needed
4. Enter the Quantity to unbuild
5. (Optional) If this product came from a specific MO, select it in the Manufacturing Order field
6. Set the Source Location
   → Where the product is currently stored
7. Set the Destination Location
   → Where the reclaimed components will go
8. If using Lot/Serial Numbers, select them (if enabled in Inventory settings)
9. If using multi-company, choose the Company
10. Click Unbuild to confirm

Create unbuild order

A new unbuild order can be created by navigating to Manufacturing app ‣ Operations ‣ Unbuild Orders, and clicking New.

Begin filling out the new unbuild order by selecting a Product to unbuild. After doing so, the Bill of Material field auto-populates with the corresponding bill of materials (BoM). If a different BoM should be used, click on the Bill of Material field, and select it from the drop-down menu.

Alternatively, a specific BoM can be selected in the Bill of Material field before selecting a product, which causes the corresponding product to auto-populate in the Product field.

Next, specify the Quantity of the product that is being unbuilt.

If the product being unbuilt was originally manufactured in a specific manufacturing order (MO), select it in the Manufacturing Order field.

In the Source Location field, select the location where the product being unbuilt is currently stored.

In the Destination Location field, select the location where the reclaimed components are stored after the unbuild order is completed.

If the Lots & Serial Numbers feature is enabled in the settings of the Inventory app, a Lot/Serial Number field appears on the unbuild order, which can be used to specify the lot(s) or serial number(s) of the product being unbuilt, if any are assigned.

If the Odoo database has been configured with multiple companies, a Company field appears on the unbuild order, which can be used to specify the company that owns the product being unbuilt.

Finally, once the product has been unbuilt, click the Unbuild button at the top of the order to confirm that it has been completed.